|
|
 |
Appliance Parts Online  |
 |
Certain procedures in this section require electrical tests or measurements while power is applied to the range. Exercise extreme caution at all times. If test points are not easily accessible, unplug the range, attach the test equipment, and reapply power for the test.
|
||
Maytag Cooktops
| PROBLEM | POSSIBLE CAUSE/SOLUTION |
Pictures - Click to enlarge |
| Burners click when off | Just cleaned range
and got the burner switches wet? Let dry out
Spill on burner switches? - Let dry Burner switch shorted - Replace |
|
| Two burners light, two do not. | Check that all four
burner igniters are sparking.
If no . Check igniters by switching burners around. If changing burners has same effect, replace the spark ignition module |
|
| All 4 burners spark whenever I turn on any burner | This is normal
operation.
|
|
| Cooks too hot on simmer | Adjust low setting
screw using small screwdriver down burner valve shaft.
|
| | Address | | Home | | Helpful Hints | |
